| 919 |
T |
toilet |
Carefully lower the toilet seat cover (1).
|
n.[C]厕所、洗手间、盥洗室 |
|
| 920 |
T |
tolerance |
This is to get the correct tolerance.
The tolerance for axial play in a spherical bearing is 0.2 mm (0.0078 in.).
|
n.[C][U]公差、容差 |
|
| 921 |
T |
tool |
Do not use hard or sharp tools to remove the ice.
|
n.[C]工具; vi.使用工具; vt.用工具给……加工 |
|
| 922 |
T |
top |
Six audio channels are defined for the top line bus.
It is located at the top right of the door.
|
n.[C]顶部,上方; adj.最高的; vt.给……加盖(或顶) |
|
| 923 |
T |
torque |
Torque the nut (6) to between 2.1 and 2.7 m.daN (15.48 and 19.91 lbf.ft).
为螺帽上2.1至2.7米达因(15.48至19.91呎磅)的扭力。
NOTE: This test causes an increase in torque.
Use two wrenches, one to hold and the other to TORQUE the IDG oil-in line (2) to between 844 and 945 lbf.in (9.53 and 10.67 m.daN).
用两根扳手,一根固定住不动,另一根为IDG进油管(项目2)上844至945吋磅的扭力。
|
|
|
| 924 |
T |
torsion |
The check valve assembly has two flaps and a torsion spring.
Loosen the screw (1) until the tension is released from the torsion bar.
|
n.[U]扭力 |
|